Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the “Programming HomeLink® (for U.S. owners)” instructions.
See also:
Switching the screens
Any one of the screen configurations can be selected.
1. Touch this button to display the following screen.
2. To select the desired screen configuration, touch one of the following
buttons.
...
Range covered by each camera
1. Front monitor
2. Side-front simultaneous display monitor
3. Side-rear simultaneous display monitor
4. Rear monitor
The illustration shown here is an example. As such, the actual visible area ...
Anti-glare inside rear view mirror
In automatic mode, sensors are used to detect the headlights of vehicles
behind and automatically reduce the reflected light.
1 Turns automatic mode on
2 Turns automatic mode off
The indicator ...