See also:

Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “ENGINE START STOP” switch OFF. The fuses are lo ...

Selecting a cellular phone to be used
Select “Connect Phone (Connect)” using a voice command or the “TUNE/SEL” knob. Pattern A Select the cellular phone to be used by either of the following methods, and select “Confirm� ...

Selecting vehicle height
Operating the switch changes vehicle rear height as follows: 1. Higher 2. Lower Vehicle height can be adjusted only when the engine is running. The selected height mode will be shown on the rear ...