Using the Bluetooth® audio system
- Audio unit

1.Display
A message, name, number, etc. is displayed.
Lower-case characters and special characters cannot be displayed.
2.Displays information that is too long to be displayed at one time on the display (press and hold)
3.Selects items such as menu
and number
Turn: Selects an item
Press: Inputs the selected item
4.Bluetooth® connection con- dition
If “BT� is not displayed, the Bluetooth® audio system cannot be used.
- Operating the system using voice commands
- Using the Bluetooth® audio system for the first time
- Menu list of the Bluetooth® audio system
See also:
Destination search by Home
1. Push the “DEST� button.
2. Touch “Go Home�.
The screen changes and displays the map location for home and the route preference.
(See “Starting route guidance� on page 83.) If home ...
Setting up the display
Setting up the information display
To set up the display, press the “DISP� switch until the desired item appears.
If left idle for approximately 10 seconds, the display will revert to the previo ...
Disabling the TRAC or Active TRAC/VSC systems
If the vehicle gets stuck in fresh snow or mud, the TRAC or Active TRAC/ VSC
systems may reduce power from the engine to the wheels. You may need to turn the
system off to enable you to rock the v ...
