Selecting and scanning files

 - Selecting a file

Turn the “TUNE/SEL” knob or press “or “” on the “SEEK•TRACK” button to select” or “the desired file.” on the “SEEK•TRACK” button to select the desired file.

 - Scanning the files in a folder

Press the “SCAN” button.

The first ten seconds of each file will be played.

To cancel, press the “SCAN” button again.

When the desired file is reached, press the “SCAN” button again.

Playing and pausing files

To play or pause a file, press the 3 ( Fast-forwarding and rewinding files ) button.

Fast-forwarding and rewinding files

To fast-forward or rewind, press and hold “or “” on the “SEEK•TRACK” button until” or “you hear a beep.” on the “SEEK•TRACK” button until you hear a beep.

    See also:

    Automatic High Beam
    The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off ...

    General settings
    Used for language selection and the on/ off settings of operation sounds and au- tomatic screen change. 1 Press the “SETUP” button. 2 Touch “General”. 3 Touch the items to be set. ...

    Connecting and disconnecting a trailer
    Stop your vehicle and a trailer in line and perform the following: • Connecting a trailer Set the rear height control air suspension to N mode. Turn off the “ENGINE START STOP” switch o ...