Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the hands-free phone system with- out the need to check the display or operate the “TUNE/SEL” knob.

 - Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

 - Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command:

“Cancel”: Exits the hands-free phone system

“Repeat”: Repeats the previous voice guidance instruction

“Go back”: Returns to the previous procedure

“Help”: Reads aloud the function summary if a help comment is regis- tered for the selected function

    See also:

    Second Scheduled Maintenance Service
    Second Scheduled Maintenance Service: 12 Months or 10,000 Miles This complimentary service is performed at 12 months or 10,000 miles, whichever occurs first. To obtain this service, contact your L ...

    Antenna locatioand effective range
    Antenna location 1 Antennas outside cabin 2 Antennas inside cabin 3 Antenna outside luggage compartment Effective range (areas withiwhich the electronic key is detected) •Whelocking or un ...

    Deactivating the curtain shield airbags in a vehicle rollover
    ON/OFF (Hold for a few seconds) The “RSCA OFF” indicator light turns on. (only when the “ENGINE START STOP” switch is in IGNI- TION ON mode). The roll sensing function for the curtain shie ...