Selecting the search area

Change the selected region in order to set a destination from a different region by using “Address”, “Point of Interest” or “Intersection & Freeway”.

1. Touch “Search Area” to display a map of the United States and Canada divided

1. Touch “Search Area” to display a map of the United States and Canada divided into 15 regions. (For map database information and updates, see “Map database information and updates” on page 408.)

2. Touch one of “US1” through “CAN” to select a region to search.

2. Touch one of “US1” through “CAN” to select a region to search.

3. Touch “OK” and the previous screen returns.

Destination search by Home

    See also:

    Disabling the TRAC or Active TRAC/VSC systems
    If the vehicle gets stuck in fresh snow or mud, the TRAC or Active TRAC/ VSC systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the v ...

    Display
    Front monitor The image from the front camera is displayed. Use this monitor to help check the area in front of the vehi- cle for safety. Side-front simultaneous display monitor The image fro ...

    Initializing the system
    Select “Initialize” and then “Confirm” using the “TUNE/SEL” knob. Select “Confirm” again using the “TUNE/SEL” knob.  - Initialization • The following data in the sy ...