Setting route
See also:
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP”
switch OFF.
The fuses are lo ...
If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle becomes
stuck in mud, dirt, or snow:
Stop the engine. Set the parking
brake and shift the shift lever to P.
Remove the mud, ...
Driving in vehicle-to-vehicle distance control mode
This mode employs a radar sensor to detect the presence of vehicles up to approximately
400 ft. (120 m) ahead, determines the current vehicle- to-vehicle following distance,
and operates to mainta ...
