What is not covered
These warranty obligations do not
apply to failures or noncompliance
caused by:
• The use of replacement parts
not certified in accordance with
aftermarket parts certification
regulations.
• The use of replacement parts not
equivalent in quality or design to
original equipment parts.
Provisions under the “What Is Not Covered” section of the New Vehicle Limited Warranty also apply to this warranty
See also:
Initialization
Items to initialize
The following items must be initialized for normal system operation in
cases such as after the battery is reconnected, or maintenance is per-
formed on the vehicle.
...
Adjusting the sensitivity of the air intake control in automatic mode (vehicles
with a rear automatic air conditioning system)
Press for 2 or more seconds.
Press “” (increase) or “”
(decrease) on the temperature control button on the driver’s side.
From - 3 (low) to 3 (high) can be set.
...
Front seats
1 Seat position fore/aft control switch
2 Seatback angle control
switch
3 Seat cushion (front) angle
control switch
4 Vertical height control
switch
5 Lumber support control
switch
6 Seat c ...