Setting home as the destination
1 Press the “DEST” button.
2 Touch “Go Home”.
“Go Home” can be used if your home address has been registered. Your home address is set as the destination.
The navigation system performs a search for the route.
3 Touch “OK”, and start driving.
Routes other than the one recommended can also be selected.
Guidance to the destination is displayed on the screen and can be heard via voice guidance.
See also:
Engine coolant
The coolant level is satisfactory if it is between the “F” and “L” lines on the
reservoir when the engine is cold.
1. Reservoir cap
2. Full
3. Low
If the level is on or below the “L ...
Have the malfunction repaired immediately.
After taking the specified steps to correct the suspected problem, check that
the warning message and light go off.
...
Screen scroll operation
When any point on the map is touched, that point moves to the center of the screen
and is shown by the cursor mark (
).
Use the scroll feature to move the desired point to the center of the sc ...