See also:

When the VSC/TRAC or Active TRAC/hill-start assist control systems are operating
If the vehicle is in danger of slip- ping or rolling backward when starting on an incline, or if any of the drive wheels spins, the slip indi- cator light flashes to indicate that the VSC/TRAC or ...

Setting up the display
Setting up the information display To set up the display, press the “DISP” switch until the desired item appears. If left idle for approximately 10 seconds, the display will revert to the previo ...

Have the malfunction repaired immediately.
After taking the specified steps to correct the suspected problem, check that the warning light turns off. *1: Open door warning buzzer: The open door warning buzzer sounds to alert one or mor ...