Selecting and scanning files
- Selecting a file
Turn the “TUNE/SEL” knob or press “
”
or “
” on the “SEEK•TRACK” button to
select the desired file.
- Scanning the files in a folder
Press the “SCAN” button.
The first ten seconds of each file will be played.
To cancel, press the “SCAN” button again.
When the desired file is reached, press the “SCAN” button again.
Playing and pausing files
To play or pause a file, press the 3 (
) button.
See also:
Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink®
indicator light will start flashing slowly. Keep pressing the HomeLink® button and
then follow the “Programming Ho ...
Regulations on the use of tire chains
Regulations regarding the use of tire chains vary depending on location and type
of road. Always check local regulations before installing chains.
Tire chain installation
Observe the following pre ...
Destination search by “Address”
There are 2 ways to search a destination by address.
(a) Search by city
(b) Search by street address
1. Push the “DEST” button.
2. Touch “Address” on the “Destination” screen.
3. To ...