Operating an iPod
Connecting an iPod enables you to enjoy music from the vehicle speakers.
- Connecting an iPod
Slide the auxiliary box lid.
Open the cover and connect an iPod using an iPod cable.
Turn on the power of the iPod if it is not turned on.
Press the “AUX•USB” button.
Control panel
- Selecting a play mode
- Selecting songs
- Fast-forwarding and rewinding songs
- Shuffle playback
- Repeat play
- Switching the display
- Adjusting sound quality and volume balance
See also:
Engine oil
With the engine at operating temperature and turned off, check the oil level
on the dipstick.
- Checking the engine oil
Park the vehicle on level ground.
After warming up the engine and t ...
Disabling the TRAC or Active TRAC/VSC systems
If the vehicle gets stuck in fresh snow or mud, the TRAC or Active TRAC/ VSC
systems may reduce power from the engine to the wheels. You may need to turn the
system off to enable you to rock the v ...
Foot print map
For the area which is covered by the foot print map (Some areas in the following
cities: Detroit, Chicago, N.Y., L.A), you can switch to the foot print map on a
scale of 75 feet (25 m).
To switch ...