Dialing by inputting a name
Press the talk switch and say “Dial
by name”.
Select a registered name to be input
by either of the following methods:
a. Press the talk switch and say a registered name.
b. Press the talk switch and say “List Names”. Press the talk switch when the desired name is read aloud.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using the “TUNE/SEL” knob.
See also:
If the vehicle battery is discharged
If you have a set of jumper (or booster) cables and a second vehicle with a 12
volt battery, you can jump start your Lexus by following the steps below.
Open the hood.
Connecting the jumper cab ...
Changing the passkey
Select “Set Passkey” using a voice
command or the “TUNE/SEL” knob.
Pattern A
Press the talk switch, say a 4 to
8-digit number, and select “Con- firm” using a voice command or the ...
Battery
Check the battery as follows:
- Battery exterior
Make sure that the battery terminals are not corroded and that there are no loose
connections, cracks, or loose clamps.
1. Terminals
2. H ...
