Headlight aim (vehicles with low beam halogen bulbs)
- Vertical movement adjustment bolts
1. Adjustment bolt A
2. Adjustment bolt B
- Before checking the headlight aim
Make sure the vehicle has a full
tank of gas and the area around the headlight is not deformed.
Park the vehicle on level ground.
Sit in the driver’s seat.
Bounce the vehicle several times.
- Adjusting the headlight aim
Turn bolt A in either direction using a Phillips-head screw- driver.
Remember the turning direction and the number of turns.
Turn bolt B the same number of turns and in the same direction as in step 1 using a Phillips-head screwdriver.
If the headlight cannot be adjusted using this procedure, take the vehicle to your Lexus dealer to adjust the headlight aim.
See also:
Front seats
1 Seat position fore/aft control switch
2 Seatback angle control
switch
3 Seat cushion (front) angle
control switch
4 Vertical height control
switch
5 Lumber support control
switch
6 Seat c ...
Dispute resolution
If a dispute arises regarding your
warranty coverage, please follow
the steps described.
Please note that you must use the
National Center for Dispute
Settlement before seeking remedies
throug ...
Stowing the flat/spare tire, jack and tools
Lay down the tire with the outer side facing up, and install the hold- ing bracket.
Insert the holding bracket tab into one of the holes in the wheel.
Raise the tire.
Pull the tire towards the re ...