Adding destinations

You can add destinations and search again for the routes.

1. Touch “Route”.

1. Touch “Route”.

2. Touch “Add”.

2. Touch “Add”.

3. Input an additional destination in the same way as the destination search.

4. Touch the desired “Add Destination Here” to determine the arrival order

4. Touch the desired “Add Destination Here” to determine the arrival order of the additional destination.

    See also:

    If a warning message is displayed
    If a warning is shown on the instrument cluster, stay calm and perform the following actions: 1. Master warning light The master warning light also comes on or flashes in order to indicate that ...

    Range covered by each camera
    1. Wide view front monitor 2. Side monitor The illustration shown here is an example. As such, the actual visible area may be different. See P. 294 for information about the visual range of each ...

    Follow the correction procedures.
    A buzzer sounds and a warning message is shown on the multi-informa- tion display. After taking the specified steps to correct the suspected problem, check that the warning message goes off. ...