Steering wheel

The steering wheel can be adjusted to a comfortable position while the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode or when the driver’s seat belt is fastened.

Up

Up
Down
Toward the driver
Away from the driver

Auto tilt away

When the “ENGINE START

When the “ENGINE START STOP” switch is turned OFF and the driver’s seat belt is unfastened, the steering wheel returns to its stowed position by moving up and away to enable easier driver entry and exit.

Switching to ACCESSORY or IGNITION ON mode or fastening the driver’s seat belt will return the steering wheel to the original position.

- Automatic adjustment of the steering position
A desired steering position can be entered to memory and recalled automatically by the driving position memory.

CAUTION

- While driving

Do not adjust the steering wheel.

Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.

    See also:

    Set up screen
    You can change the touch screen to your desired settings. Press the “SETUP” button to display the “Setup” screen. General settings This screen is used for language selection and the o ...

    Command list
    Recognizable voice commands and their actions are shown below. • All commands are listed in the table. • For devices that are not installed in the vehicle, the related commands will not be d ...

    Open source license
    This product uses the following open source software. · T-Kernel This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum (www.t-engine.org). · C Library ...