See also:

Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the “Programming Ho ...

Disabling pre-collision braking
1.Pre-collision braking disabled 2.Pre-collision braking enabled The “PCS” warning light turns on when pre-collision braking is dis- abled. ...

Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “ENGINE START STOP” switch OFF. The fuses are lo ...