Safety Connect LED light Indicators

When the “ENGINE START STOP” switch is turned to IGNITION ON mode, the red indicator light comes on for 2 seconds then turns off.

Afterward, the green indicator light comes on, indicating that the service is active.

The following indicator light patterns indicate specific system usage con- ditions:

• Green indicator light on = Active service

• Green indicator light flashing = Safety Connect call in process

• Red indicator light (except at vehicle start-up) = System malfunction (contact your Lexus dealer)

• No indicator light (off) = Safety Connect service not active

    See also:

    Setting speed dials
    Select “Set Speed Dial (Speed Dial)” using a voice command or the “TUNE/SEL” knob. Pattern A Select the data to be registered as a speed dial by either of the following methods, and se ...

    Replacing a flat tire
    Chock the tires. Pry off the wheel ornament, using the beveled end of the wheel orna- ment remover as shown. Slightly loosen the wheel nuts (one turn). Assembling the jack handle. Remove ...

    Maintenance data (fuel, oil level, etc.)
    *1: Unladen vehicles *2: Vehicles with roof luggage carrier *3: Vehicles without roof luggage carrier Vehicle identification - Vehicle identification number The vehicle identification number (V ...