Navigation settings
“Home” and “Preset Destinations” can be set and edited.
Points or areas on the map can be registered.
On this screen, the following operations can be performed.
See also:
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP” switch
off.
Open the fuse ...
Limitations of the navigation system
This navigation system calculates the current vehicle position using satellite
signals, various vehicle signals, map data, etc. However, the accurate position
may not be shown depending on the sat ...
Destination search by “Coordinates”
1. Push the “DEST” button.
2. Touch “Coordinates” on the second page of the “Destination” screen.
3. Input the latitude and the longitude.
4. When the input is finished, touch “OK ...