Before driving

See also:

Setting up the display
Setting up the information display To set up the display, press the “DISP” switch until the desired item appears. If left idle for approximately 10 seconds, the display will revert to the previo ...

Do-it-yourself maintenance
Do-it-yourself service precautions If you perform maintenance by yourself, be sure to follow the correct procedures as given in these sections. CAUTION: The engine compartment contains many ...

Disabling pre-collision braking
1.Pre-collision braking disabled 2.Pre-collision braking enabled The “PCS” warning light turns on when pre-collision braking is dis- abled. ...