Taking out the jack
Remove the cover.
Unhook the rubber band and take out the jack.
1. For loosening
2. For tightening
See also:
Initial screen
1 When the “ENGINE START STOP”
switch is in ACCESSORY or IGNI-
TION ON mode, the initial screen will
be displayed and the system will begin
operating.
• Images shown on the initial screen ...
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP”
switch OFF.
The fuses are lo ...
Selecting and scanning a folder
- Selecting folders one at a time
Press the 6 () or 5 ()
button to select the desired folder.
- Returning to the first folder
Press and hold the 5 () button until
you hear a beep.
...