If you have a flat tire
Remove the flat tire and replace it with the spare provided.
- Before jacking up the vehicle
• Stop the vehicle on a hard, flat surface.
• Set the parking brake.
• Shift the shift lever to P.
• Vehicles with rear height control air suspension: Turn off the height control.
• Stop the engine.
• Turn on the emergency flashers.
- Location of the spare tire, jack and too
- Taking out the jack
- Taking out the tool box
- Taking out the spare tire
- Replacing a flat tire
- Installing the spare tire
- Stowing the flat/spare tire, jack and tools
See also:
Selecting conventional constant speed control mode
Constant speed control mode differs from vehicle-to-vehicle distance control
mode. When constant speed control mode is selected, your vehi- cle will maintain
a set speed regardless of whether or n ...
Safety information for Safety Connect
Important! Read this information before using Safety Connect.
- Exposure to radio frequency signals
The Safety Connect system installed in your vehicle is a low-power radio transmitter
and r ...
Turn signal lever
The turn signal lever can be used to show the following intentions of the driver:
1. Right turn
2. Left turn
3. Lane change to the right (push and hold the lever part- way)
The right hand signal ...